German MEP software developer LINEAR is holding the third session of its LINEAR@WORK webinar series on Wednesday, December 16, 2026. The topic is planning building services early: placing plant rooms and main service routes in the Revit model before the detailed design starts.
When and where
- Title: “Von der Idee zur Trasse: TGA-Planung von Anfang an mitdenken” (From the idea to the route: thinking about building services from the start)
- Date: Wednesday, December 16, 2026
- Time: 10:00. The page does not name a time zone; as LINEAR is based in Germany, this is most likely 10:00 Paris and Berlin time. Check the invitation email to be sure.
- Format: online webinar, session 3 of 13 in the LINEAR@WORK series
- Language: German
- Price: free registration, according to the sign-up form
- Speaker: Sebastian Ortmüller
What it covers
The session presents LINEAR’s “Trassenkonzept”, its route concept for laying out technical centres and supply routes early in the model. According to the program:
- Plant rooms can be sized from experience or by calculation, including to the German VDI 2050 guideline.
- Once room data exists, heating, cooling, ventilation and sanitary demands are added up section by section.
- Duct and pipe cross-sections are derived from those totals.
- The routes are coordinated with other disciplines through IFC.
- Later, the routes become the basis for the real ductwork and pipework, which a later webinar in the series covers for ventilation.
Who should attend
MEP designers and BIM coordinators who work in Revit with LINEAR tools, or who are looking at them, will get the most out of it. The approach also matters to architects and project leads who want space for plant rooms and shafts reserved early, before the layout is frozen. The webinar is in German, so it is mainly aimed at the DACH market.
How to register
Register on the LINEAR@WORK page. Tick “Für dieses Webinar anmelden” for session 3 (and any other sessions you want), then fill in the form at the bottom of the page. LINEAR sends a separate invitation email for each selected webinar.
Source
- LINEAR@WORK webinar series (German)
- revit.news: LINEAR webinar on quick heat load sizing with Revit, December 2

