LINEAR webinar on quick heat load sizing with Revit: December 2

Share

German MEP software developer LINEAR is holding a free webinar on Wednesday, December 2, 2026, on quick heat load calculations with or without a Revit model. It is the second session of LINEAR@WORK, a 13-part series that follows one building through the whole HVAC design process in Revit and AutoCAD.

When and where

  • Title: “Heizlast im Schnellverfahren, mit und ohne Modell” (Quick heat load sizing, with and without a model)
  • Date: Wednesday, December 2, 2026
  • Time: 10:00. LINEAR does not state the time zone; as a German company this should be Central European Time, also 10:00 in Paris. Your invitation email will confirm it.
  • Format: online webinar
  • Language: German
  • Price: free sign-up, according to the registration form

What it covers

The session is presented by Christian Streller. According to the series page, it shows:

  • a fast heat load estimate based on area-related values, for early design stages;
  • sizing heating surfaces and pipe networks when you only have a paper or PDF plan;
  • with a Revit model, designing underfloor heating and writing the result back into the model.

The full model-based heat load calculation is kept for session 5 of the series. LINEAR says each webinar is designed to stand on its own, so you do not need to have followed the first one.

Who should attend

HVAC engineers and MEP designers in German-speaking countries, especially those who work in Revit with LINEAR Building or are evaluating it. The “without a model” part is also relevant for teams that still receive PDF drawings at early stages.

How to register

On the LINEAR@WORK page, tick “Für dieses Webinar anmelden” next to session 02, then fill in the form at the bottom of the page. LINEAR sends a separate invitation for each session you select, and posts the recording on the same page afterwards. The next session, on HVAC routing and plant rooms, follows on December 16.

Source

Get the Revit news that matters

AI, releases, add-ins and API updates for Revit users. One short email, no spam, unsubscribe anytime.

Get the Revit news that matters

AI, releases, add-ins and API updates for Revit users. One short email, no spam, unsubscribe anytime.

Editor of revit.news and founder of HEXABIM. 25 years in civil engineering and digital modelling. Articles are prepared with the help of automated tools from linked public sources and published under his editorial responsibility.

Get the Revit news that matters

AI, releases, add-ins and API updates for Revit users. One short email, no spam, unsubscribe anytime.

Read more

Tool of the day: B45 Coordination, free QA/QC and clash checks inside Revit

Model checks, clash review and sheet chores often run in separate tools, or by hand. B45 Coordination, a free Revit add-in from B45 Labs, groups them in one ribbon tab for BIM coordinators and modelers who need to find problems before a model goes out.

Latest Revit news